Annie Chemie P Ltd is engaged in manufacture of Shale Gas Fracturing Chemicals. Ammonium Persulfate, Potassium Persulphate & Sodium Bromate based Encapsulated Gel Breaker for Guar is offered. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Encapsulated Gel Breaker is in these pages.

Home ------------ Contact

High Temperature Encapsulated Sodium Bromate Gel Breaker SDS of Manufacturers Exporters

By air Exporter By Sea Supplier Bags Palletized Jumbo pack Carboys Pail Liquid

Specifications of High Temperature Encapsulated Sodium Bromate Gel Breaker Manufacturers

Encapsulated Sodium Bromate Suppliers

Encapsulated Gel Breaker Sodium Bromate Based SDS, Safety Data Sheet
MSDS

1. Product Identification

Product Name & Other Names: Encapsulated Sodium Bromate, Coated Gel Breaker
CAS No.: Mixture.
Intended Use: Oil & Gas Exploration. Breaking of Gaur Gum Gel in Oil well drilling fracking or fracturing.
Molecular Weight: Not applicable
Chemical Formula: Not applicable
Intended uses and uses advised against (if any): Oil & Gas Wells fracturing and Industrial Manufacturing.

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Oxidizing Solids Category 3, H272
Acute toxicity - Oral Category 4, H302
Skin corrosion/irritation Category 2, H315
Serious eye damage/eye irritation Category 2A, H319
Specific target organ toxicity (single exposure), Respiratory tract Category 3, H335

Labeling according to GHS USA & Regulation (EC) No 1272/2008

GHS Label Elements
Oxidizer
Oxidizer

GHS Label Elements
Irritant
Irritant

Signal Words: Warning

Hazard Statements:
H272: May intensify fire; oxidizer
H302: Harmful if swallowed
H315: Causes skin irritation
H319: Causes serious eye irritation
H335: May cause respiratory irritation.

Precautionary Statements - Prevention:
P210: Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
P220: Keep/Store away from clothing/other combustible materials
P221: Take any precaution to avoid mixing with combustibles.
P260: Do not breathe dust/fume/gas/mist/vapors/spray
P264: Wash ... thoroughly after handling
P270: Do not eat, drink or smoke when using this product
P271: Use only outdoors or in a well-ventilated area.
P280-Wear protective gloves/protective clothing/eye protection/face protection.
P285: In case of inadequate ventilation wear respiratory protection.
Precautionary Statements - Response:
P301 + P312: IF SWALLOWED: Call a POISON CENTER or doctor if you feel unwell.
P302 + P352: IF ON SKIN: Wash with plenty of water.
P304 + P341: IF INHALED: If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P314: Get Medical advice/attention if you feel unwell.
P330: If swallowed, rinse mouth.
P332+P313: If skin irritation occurs: Get medical advice/attention
P337+P313: If eye irritation persists: Get medical advice/ attention.
P360: Rinse immediately contaminated clothing and skin with plenty of water before removing clothes.
P362: Take off contaminated clothing and wash before reuse.
Precautionary Statements - Storage
P402: Store in a dry place
P403 + P233 - Store in a well-ventilated place. Keep container tightly closed
P501: Dispose of contents/container in accordance with local/regional/national/international regulations.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbols:
O Oxidizing
Xn Harmful
Xi Irritant
Risk Phrases:
R8- Contact with combustible material may cause fire.   
R22 Harmful if swallowed
R36/37/38 Irritating to eyes, respiratory system and skin.

3. Composition/Information on Ingredients

Name and ----------------------------- % Content

CAS Number ---- EINECS EC Number

Sodium Bromate ------------------- Less than 80

CAS Number 7789-38-0  EC 232-160-4

Other Non-Hazardous Ingredients - Less than 40%

Confidential Business Information.

4. First Aid Measures

Always seek medical attention after first aid measures are provided.

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: If swallowed, Do not induce vomiting. Give large quantities of water. Never give anything by mouth to an unconscious person. Get medical attention immediately.
Skin Contact: In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Cover the irritated skin with an emollient. Cold water may be used. Wash clothing & shoes before reuse. Get medical attention.
Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention.

5. Fire Fighting Measures

Fire: It is not combustible, but substance is a strong oxidizer and its heat of reaction with reducing agents or combustibles may cause ignition. Heating or contact with water releases oxygen which may intensify combustion in an existing fire.
Explosion: An explosion hazard when mixed with finely powdered organic matter, metal powder, or reducing agents.
Fire Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Use means suitable for extinguishing surrounding fire. Do not use water.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Sealed containers may rupture when heated. Use water spray to cool unopened containers.
Special hazards arising from the substance or mixture: Hydrogen bromide gas, Sodium oxides.

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material. Keep away from drains, surface and groundwater and soil.
Environmental precautions: Do not let the product enter drains. Avoid seepages in to soil or ground water.
Methods and materials used for containment Cleanup procedures and Storage:
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container.
Large Spill: It is an oxidizing material. Stop leak if without risk. Avoid contact with a combustible material (wood, paper, oil, clothing...). Keep the substance damp using water spray. Do not touch spilled material. Prevent entry into sewers. Eliminate all ignition sources.

7. Handling and Storage

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices with proper ventilation. Wash thoroughly after handling. Do not drink, eat or smoke while handling. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Do not store with incompatible materials like combustibles, organic or other readily oxidizable materials. Avoid storage on wood floors. Containers of this material may be hazardous when empty since they retain product residues.
Wear personal protective equipment. Avoid breathing dust. Handle product only in closed system or provide appropriate exhaust ventilation at machinery.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits: This product does not contain any hazardous materials with occupational exposure limits established by the region specific regulatory bodies. Manufacturers recommend 5 mg/m3 (TWA).
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards.

9. Physical and Chemical Properties

Appearance: Encapsulate Gel Breaker Sodium Bromate is off-white crystals
Odor: Mild organic odor
Odor threshold: Not available.
pH: Not available.
Relative density: Not available.
Melting point/freezing point: Not available.
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Solubility: Soluble in water.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Viscosity: Not available.

10. Stability and Reactivity

Stability: It is stable under ordinary conditions of use and storage. Avoid moisture.
Hazardous Decomposition Products: Decomposed by moisture to form oxygen and ozone. Burning may produce nitrogen oxides, sodium oxides, bromine or hydrobromic acid and fumes.
Hazardous Polymerization: Will not occur
Incompatibilities: Reducing agents, organic material, sodium peroxide, water and powdered metals especially aluminum
Conditions to Avoid: Moisture, combustible materials and incompatibles.

11. Toxicological Information

Sodium Bromate
LD50 Intraperitoneal - mouse - 140 mg/kg
LD50 Oral Rat 400 mg/kg
Carcinogenicity: Not listed by ACGIH, IARC, NTP, or CA Prop 65.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.

12. Ecological Information

Environmental Toxicity: No information found.
Persistence and Degradability: No information available.
Mobility: No information available.
Results of PBT and vPvB assessment: No data available for assessment.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be handled as hazardous waste and sent to a RCRA approved waste facility. Processing use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with legal requirements.

14. Transport Information

Domestic (Land, DOT USA) & ADR/RID
UN/NA: UN1494
Proper Shipping Name: Contains Sodium Bromate
Hazard Class: 5.1; Packing Group: II
International (Water, I.M.O.)
UN/NA: UN1494
Proper Shipping Name: Contains Sodium Bromate
Hazard Class: 5.1; Packing Group: II

15. Regulatory Information

USA:
California No Significant Risk Level: None of the chemicals in this product are listed.

Section 16 - Additional Information

DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.

High Temperature Encapsulated Sodium Bromate Gel Breaker Manufacturers Suppliers Exporters:
Annie Chemie P Ltd.
Offered from UAE, USA and Gujarat-India.
TELEPHONE: (OFFICE) 91-22-23770100, 23726950; FAX: 91-22-23728264
Between 5 Hour GMT to 12 Hour GMT

Encapsulated Gel Breaker
e-mail: info@anniechemie.com

Last updated: January 17, 2022

Exporters to USA Canada UAE Europe China, Russia South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.